Mehdi Fakoorsaghieh

Educations

• B.S, 2001, Mechanical Engineering- Solid Mechanics, Iran University of Science and Technology
• M.S, 2003, Aero- Space Engineering, Iran University of Science and Technology
• Ph.D , 2010, Mechanical Engineering-Applied Mechanics, Iran University of Science and Technology

Memberships

• Iranian Society of Mechanical Engineers, Member, National, 2011/09/25
• Iranian Society of Mechanical Engineers, Member, National, 2011/09/25

Compilation Books

• daneshjou, Kamran, Mohammad Reza Hosseini Nami, Mahdi Fakoor saghiye, and Zahra Daneshjou. "Fundamentals of Satellite Deployment Device Design." Tehran: Islamic Azad University, 2013.
• Fakoor saghiye, Mahdi, and Zahra Daneshjou. "Fracture and Fatigue in wood." Tehran: Islamic Azad University, 2013.

National Articles

• Fakoor saghiye, Mahdi, , and Mahshid Soleimani. "Optimal Design of Guidance Algorithm for the Reconfiguration Phase of the Satellite Constellation." Mechanical Engineering modares 16, no. 2 (2016): 31-40.
• Fakoor saghiye, Mahdi, Amir Reza Kosari, and Hossein Saleh Ghafari. "Hybrid estimation of gyro model parameters and GEO satellite moment of inertia." Journal of Space Science and Technology (JSST) 6, no. 2 (2013): 74-67.
• Fakoor saghiye, Mahdi, Marzieh Taghinezhad, and Amir Reza Kosari. "Review of Methods for Optimal Layout of Satellite Components." Mechanical Engineering modares 13, no. 9 (2013): 137-126.
• Fakoor saghiye, Mahdi, and Negar Motamen. "System design algorithm for mission oriented systems with reliability approach." Mechanical Engineering modares 14, no. 1 (2014): 1.
• Kosari, Amir Reza, Mahdi Fakoor saghiye, Shidvash Vakilipour, and Vahid Bohlouri. "Development of a systematic design approach for a cubic Satellite using design structure Matrix method." space technology and Knowledge 4, no. 1 (2015): 33-45.
• Kosari, Amir Reza, Marzieh Dolatabadi, Mahdi Fakoor saghiye, and Mohmmad ali Amiri Atashgah. "Prediction of Satellite Ballistic Lifetime in the Presence of Aerodynamic Forces and Moments." space technology and Knowledge 3, no. 2 (2014): 7-18.
• Kosari, Amir Reza, Mahdi Peyrovani, Mahdi Fakoor saghiye, and Hossein Nejat Pishkenari. "Design of LQG/LTR controller for attitude control of Geostationary satellite using Reaction Wheels." Mechanical Engineering modares 13, no. 14 (2014): 209.
• Maani, Ehsan, Amir Reza Kosari, and Mahdi Fakoor saghiye. "Two-obejective optimization of GEO communication satellite trajectory considering impulsive orbital maneuver." Mechanical Engineering modares 14, no. 5 (2014): 121-128.
• Kosari, Amir Reza, Mahdi Peyrovani, Mahdi Fakoor saghiye, and Hossein Nejat. "Design of LQG/LTR controller for attitude control of Geostationary satellite using reduced quaternion model." Mechanical Engineering modares 14, no. 6 (2014): 1-10.
• Maani, Ehsan, Amir Reza Kosari, and Mahdi Fakoor saghiye. "Two-objective optimization of GEO communication satellite trajectory considering continuous orbital maneuver." Mechanical Engineering modares 13, no. 7 (2013): 142-152.
• Kosari, Amir Reza, Samane Kaviri, Behzad Moshiri, and Mahdi Fakoor saghiye. "Design of optimal thruster configuration for attitude and position control of GEO satellite." Mechanical Engineering modares 13, no. 13 (2014): 67.
• Damirchely, Mahrad, Sara Mirshekari, and Mahdi Fakoor saghiye. "Extraction of optimum design process for satellite solar panel based on reliability and solutions to improve it." Modares Mechanical Engineering 17, no. 8 (2017): 241-251.
• Fakoor saghiye, Mahdi, Mohadese Ghorbani, and Majid Bakhtiari. "New Approaches to Cover Regional Satellite System Design Using GDOP." Mechanical Engineering modares 17, no. 4 (2017): 193-200.
• Fakoor saghiye, Mahdi, and Nabi Mehri Khansari. "Simulation of Orthotropic Damaged Zone Behavior Using Viscoelastic Models." Amirkabir (Journal of Science and Technology) 1, no. 1 (2016): 1.
• Fakoor saghiye, Mahdi, Alireza Sattarzadeh, and . "A novel 3- axis attitude stabilization with redundant thruster for a cube-satellite supported by reaction wheels." Mechanical Engineering modares 0, no. 0 (2016): 1.
• [], [], Parviz Mohamazadeh, and Mehdi Fakoorsaghieh. "Design for reliability: optimization of critical structures using cross-entropy reliability analysis." Iranian Journal of Mechanical Engineering, 20, no. 3 (2018): 41-58.
• Fakoor saghiye, Mahdi , and Farzad Shirmohamadli. "Analytical Investigation of Induced Stresses on Solder Joints of Electronic Boards under Random Vibration." Modares Mechanical Engineering 18, no. 04 (2018): 563-570.
• Iman Veisi Khaneghahi, Mehdi Fakoorsaghieh, and Mehran Shahriary. "Optimal Layout Design of a Satellite Considering Thermal Control Subsystem Constraints." Modares Mechanical Engineering 19, no. 8 (2019): .
• Mehdi Fakoorsaghieh, Hadi Parviz, and Arash Abbasi. "Uncertainty propagation analysis in free vibration of uncertain composite plate using stochastic finite element method." Amirkabir Journal of Mechanical Engineering 52, no. 12 (2021): .

International Articles

• Daneshjoo, Zahra, Mahmood M. Shokrieh, Mehdi Fakoorsaghieh, and Rene Alderliesten. "A new mixed mode I/II failure criterion for laminated composites considering fracture process zone." Theoretical and Applied Fracture Mechanics 98, no. 1 (2018): 48-58.
• Fakoor saghiye, Mahdi, and Roham Rafiee. "Transition Angle a Novel Concept for Predicting the Failure Mode in Orthotropic Materials." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 1, no. 1 (2012): -.
• Torabi, Ali Reza, Mahdi Fakoor saghiye, and Ebrahim Pirhadi. "Fracture analysis of U-notched disc-type graphite specimens under mixed mode loading." International Journal of Solids and Structures 51, no. 6 (2013): 1287-1298.
• Torabi, Ali Reza, Mahdi Fakoor saghiye, and Ebrahim Pirhadi. "Tensile fracture in coarse-grained polycrystalline graphite weakened by a U-shaped notch." Engineering Fracture Mechanics 111, no. 1 (2013): 77-85.
• Rahamni, kiana, Alibakhsh Kasaeian, Mahdi Fakoor saghiye, Amir Reza Kosari, and Seyed Benyamin Alavi. "Wind Power Assessment and Site Matching of Wind Turbines in Lootak of Zabol." International Journal of Renewable Energy Research 4, no. 4 (2014): 965.
• Fakoor saghiye, Mahdi, and Roham Rafiee. "Fracture investigation of wood under mixed mode I/II loading based on the maximum shear stress criterion." STRENGTH OF MATERIALS 45, no. 3 (2013): 378-385.
• , DANESHJOU Kamran, and Mahdi Fakoor saghiye. "Efficient Algorithm for Reliability Analysis of Structures under Random Vibration." JSME International Journal, Series A: Solid Mechanics and Material Engineering 1, no. 11 (2007): 1293-1304.
• Fakoor saghiye, Mahdi, and Nabi Mehri Khansari. "Mixed mode I/II fracture criterion for orthotropic materials based on damage zone properties." Engineering Fracture Mechanics 153, no. 1 (2016): 407-420.
• Fakoor saghiye, Mahdi, and Marziye Taghinezhad. "Layout and configuration design for a satellite with variable mass using hybrid optimization method." Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 230, no. 2 (2015): 360-377.
• Fakoor saghiye, Mahdi, Amir Reza Kosari, and Mohsen Jafarzadeh. "Revision on fuzzy artificial potential field for humanoid robot path planning in unknown environment." International Journal of Advanced Mechatronic Systems 6, no. 4 (2015): 174-183.
• Fakoor saghiye, Mahdi. "Augmented Strain Energy Release Rate (ASER): A Novel Approach for Investigation of Mixed-Mode I/II Fracture of Composite Materials." Engineering Fracture Mechanics 179, no. 1 (2017): 177-189.
• Fakoorsaghieh, Mehdi , and Hannaneh Manafi Farid. "Mixed-mode I/II fracture criterion for crack initiation assessment of composite materials." Acta Mechanica 1, no. 1 (2018): 1.
• daneshjou, Kamran, Majid Bakhtiari, hossein Parsania, and Mahdi Fakoor saghiye. "Non-Fourier heat conduction analysis of infinite 2D orthotropic FG hollow cylinders subjected to time-dependent heat source." Applied Thermal Engineering 98, no. 1 (2016): 582-590.
• daneshjou, Kamran, , Reza Alibakhshi, and Mahdi Fakoor saghiye. "Transient thermal analysis in 2D orthotropic FG hollow cylinder with heat source." International Journal of Heat and Mass Transfer 89, no. 1 (2015): 977-984.
• Bakhtiari, Majid, Kamran daneshjou, hossein Parsania, and Mahdi Fakoor saghiye. "HYPERBOLIC HEAT CONDUCTION ANALYSIS FOR AN ORTHOTROPIC FG HOLLOW SPHERE WITH INTERNAL HEAT SOURCE. APPLICATION OF A NEW AUGMENTED STATE SPACE METHOD." Heat Transfer Research 48, no. 15 (2017): 1399-1419.
• Fakoor saghiye, Mahdi, Seyed Mohammad Navid Ghoreishi, and Hossein Sabaghzadeh. "Spacecraft Component Adaptive Layout Environment (SCALE): an Efficient Optimization Tool." Advances in Space Research 1, no. 1 (2016): 1.
• Fakoor saghiye, Mahdi, , and Mahshid Soleimani. "Optimal Design of the Satellite Constellation Arrangement Reconfiguration Process." Advances in Space Research 1, no. 1 (2016): 1.
• Fakoor saghiye, Mahdi, Seyed Mohammad Navid Ghoreishi, and Nabi Mehri Khansari. "Investigation of composite coating effectiveness on stress intensity factors of cracked composite pressure vessels." Journal of Mechanical Science and Technology 1, no. 1 (2016): 1.
• Mehrdad Shokrieh, Mahmood, Zahra Daneshjoo, and Mahdi Fakoor saghiye. "A modified model for simulation of mode I delamination growth in laminated composite materials." Theoretical and Applied Fracture Mechanics 82, no. 1 (2016): 107-116.
• Fakoor saghiye, Mahdi, Roham Rafiee, and Masood Sheikhansari. "The influence of fiber-crack angle on the crack tip parameters in orthotropic materials." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 0, no. 0 (2015): 1-14.
• Bakhtiari, Majid, Kamran daneshjou, and Mahdi Fakoor saghiye. "Long-term effects of main-body’s obliquity on satellite formation perturbed by third-body gravity in elliptical and inclined orbit." Research in Astronomy and Astrophysics 17, no. 4 (2017): 39.
• Fakoor saghiye, Mahdi, Fateme Amozegary, Majid Bakhtiari, and Kamran daneshjou. "Relative Tracking Control of Constellation Satellites Considering Inter-Satellite Link." Advances in Space Research , no. (2017): .
• Fakoor saghiye, Mahdi, and Seyed Mohammad Navid Ghoreishi. "Comprehensive investigation of stress intensity factors in rotating disks containing three-dimensional semi-elliptical cracks." Applied Mathematics and Mechanics (English Edition) , no. (2017): .
• Bakhtiari, Majid, Kamran daneshjou, and Mahdi Fakoor saghiye. "Relative hovering analysis about an elliptical perturbed orbit with consideration of dynamic air drag and oblate earth." Aerospace Science and Technology , no. (2017): .
• Mohammadzadeh, Parviz, Mehdi Fakoorsaghieh, and Mostafa Mohagheghi. "Bi-level optimization of laminated composite structures using particle swarm optimization algorithm." Journal of Mechanical Science and Technology 32, no. 4 (2018): 1643-1652.
• Fakoor saghiye, Mahdi, Parviz Mohammadzadeh, and Homa Momeni. "Developing an optimal layout design of a satellite system by considering natural frequency and attitude control constraints." Aerospace Science and Technology 71, no. 1 (2017): 172-188.
• Fakoorsaghieh, Mehdi , and Seyed Mohammad Navid Ghoreishi. "Verification of a micro-mechanical approach for the investigation of progressive damage in composite laminates." Acta Mechanica 1, no. 1 (2018): 1.
• Manafi Farid, Hannaneh, and Mehdi Fakoorsaghieh. "Mixed mode I/II fracture criterion for arbitrary cracks in orthotropic materials considering T-stress effects." Theoretical and Applied Fracture Mechanics 99, no. 1 (2019): 147-160.
• Mehri Khansari, Nabi, Mehdi Fakoorsaghieh, and Filippo Berto. "Probabilistic micromechanical damage model for mixed mode I/II fracture investigation of composite materials." Theoretical and Applied Fracture Mechanics 99, no. 2 (2019): 177-193.
• Fakoorsaghieh, Mehdi , and Maryam Shokrollahi. "A new macro-mechanical approach for investigation of damage zone effects on mixed mode I/II fracture of orthotropic materials." Acta Mechanica 0, no. 0 (2018): 0.
• Fakoorsaghieh, Mehdi , and Nabi Mehri Khansari. "A New Approach for Investigation of Mode II Fracture Toughness in Orthotropic Materials." LATIN AMERICAN JOURNAL OF SOLIDS AND STRUCTURES 15, no. 3 (2018): 1-22.
• Fakoorsaghieh, Mehdi , and Nabi Mehri Khansari. "General mixed mode I/II failure criterion for composite materials based on matrix fracture properties." Theoretical and Applied Fracture Mechanics 96, no. 1 (2018): 428–442.
• Fakoorsaghieh, Mehdi , and Seyed Mohammad Navid Ghoreishi. "Experimental and numerical investigation of progressive damage in composite laminates based on continuum damage mechanics." Polymer Testing 70, no. 1 (2018): 533-543.
• Fakoor saghiye, Mahdi, Alireza Sattarzadeh, and Majid Bakhtiari. "A New Approach in Three-Axis Satellite Stabilization Using Redundant Thruster in Elliptical Orbit." International Journal of Automation and Control , no. ( ): .
• Soleimani, Mahshid, Mehdi Fakoorsaghieh, and Majid Bakhtiari. "Optimal mission planning of the reconfiguration process of satellite constellations through orbital maneuvers: A novel technical framework." Advances in Space Research 63, no. 10 (2019): 3369-3384.
• Najafizadeh Sari, Naeimeh, Mehdi Fakoorsaghieh, and Hadi Jahanshahi. "Adaptive Fuzzy PID Control Strategy for Spacecraft Attitude Control." INTERNATIONAL JOURNAL OF FUZZY SYSTEMS 21, no. 3 (2019): 769-781.
• Fakoorsaghieh, Mehdi, Parviz Mohamazadeh, and Elmira Jafari. "Optimization of Composite Stiffened Cylindrical Shell using PSO Algorithm." JOURNAL OFAEROSPACE SCIENCE AND TECHNOLOGY 11, no. 2 (2017): 43-51.
• Daneshjoo, Zahra, Mahmood M. Shokrieh, and Mahdi Fakoor saghiye. "A micromechanical model for prediction of mixed mode I/II delamination of laminated composites considering fiber bridging effects." Theoretical and Applied Fracture Mechanics 94, no. 1 (2018): 46-56.
• Fakoorsaghieh, Mehdi, Roham Rafiee, and Zare hossein abadi Shahab. "Equivalent reinforcement isotropic model for fracture investigation of orthotropic materials." Steel and Composite Structures 30, no. 1 (2019): 1-12.
• Mahrad Damirchely, Mehdi Fakoorsaghieh, and Hamed Yadegari. "Failure assessment logic model (FALM): A new approach for reliability analysis of satellite attitude control subsystem." Reliability Engineering and System Safety 198, no. 1 (2020): 106889.
• Fakoor saghiye, Mahdi. "Development of an optimal process for friction stir welding based on GA-RSM hybrid algorithm." Fracture and Structural Integrity , no. ( ): .
• Daneshjoo, Zahra, Mahmood Mehrdad Shokrieh, Mehdi Fakoorsaghieh, Rene Alderliesten, and Dimitrios Zarouchas. "Physics of delamination onset in unidirectional composite laminates under mixed-mode I/II loading." Engineering Fracture Mechanics 211, no. 1 (2019): 82-98.
• Hannaneh Manafi Farid, and Mehdi Fakoorsaghieh. "Mixed mode I/II fracture criterion to anticipate behavior of the orthotropic materials." STEEL AND COMPOSITE STRUCTURES 34, no. 5 (2020): 671.
• Mehdi Fakoorsaghieh, Sahar Sadeghi Kord Kheili, and Majid Bakhtiari. "Investigation of Low Thrust Optimal Orbital Transfer from LEO to GEO Considering Circular Orbits." JOURNAL OF THE ASTRONAUTICAL SCIENCES 1, no. 1 (2019): .
• Mehdi Fakoorsaghieh, Shayesteh Nikpay, and Ahmad Kalhor. "On the ability of sliding mode and LQR controllers optimized with PSO in attitude control of a flexible 4-DOF satellite with time-varying payload." ADVANCES IN SPACE RESEARCH 1, no. 1 (2020): .
• Mehdi Fakoorsaghieh, and Sadra Shahsavar. "Fracture assessment of cracked composite materials: Progress in models and criteria." THEORETICAL AND APPLIED FRACTURE MECHANICS 105, no. 1 (2020): 102430.
• Zahra Khaji, and Mehdi Fakoorsaghieh. "Strain energy release rate in combination with reinforcement isotropic solid model (SERIS): A new mixed-mode I/II criterion to investigate fracture behavior of orthotropic materials." THEORETICAL AND APPLIED FRACTURE MECHANICS 113, no. 102962 (2021): 102962.
• Seyed Mohammad Navid Ghoreishi, Mehdi Fakoorsaghieh, and Ahmad Azizi. "Progressive failure analysis of notched composite plate by utilizing macro mechanics approach." Frontiers of Structural and Civil Engineering 15, no. 3 (2021): 623-642.
• Mehdi Fakoorsaghieh, and Hadi Parviz. "Uncertainty propagation in dynamics of composite plates: A semi-analytical non-sampling-based approach." Frontiers of Structural and Civil Engineering 14, no. 6 (2020): 1359-1371.
• Sadra Shahsavar, Mehdi Fakoorsaghieh, and Flippo Berto. "Mixed mode I/II fracture criterion to anticipate cracked composite materials based on a reinforced kinked crack along maximum shear stress path." STEEL AND COMPOSITE STRUCTURES 39, no. 6 (2021): 765.
• Mehdi Fakoorsaghieh, and Sadra Shahsavar. "The effect of T-stress on mixed mode I/II fracture of composite materials: Reinforcement isotropic solid model in combination with maximum shear stress theory." INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES 229, no. 111145 (2021): .

National Conferences

• Kosari, Amir Reza, , Behzad Moshiri, and Mahdi Fakoor saghiye. "Design of optimal thruster configuration for attitude contral of geostationary satellite." First Intrenational Conferece on Robotics and Mechatronics, Tehran, February 13-14, 2013 .
• Kosari, Amir Reza, Samane Kaviri, Behzad Moshiri, and Mahdi Fakoor saghiye. "Constraint Control Allocation Using Differential Evolution for Overactuated Geostationary Communications Satellite." 21st Iranian conference on electrical engineering, Tehran, May 14-16, 2013 .
• Kosari, Amir Reza, , Behzad Moshiri, and Mahdi Fakoor saghiye. "Design of optimal thruster configuration for attitude cotrol of geostationary satillite." 12th Conference of Iranian Aerospace Society, Tehran, February 19-21, 2013 .
• Kosari, Amir Reza, Marzieh Dolatabadi, Mahdi Fakoor saghiye, and Mohmmad ali Amiri Atashgah. "Atmosphere identification for modeling of transfer orbit environmental conditions." National and joint convention on computer engineering and mechanics 2013, Urmia, May 8-9, 2013 .
• Torabi, Ali Reza, Mahdi Fakoor saghiye, and Ebrahim Pirhadi. "Theoretical and experimental analysis of brittle fracture in U-notch graphite parts under pure tension." ISME 2013, Tehran, May 7-9, 2013 .
• Fakoor saghiye, Mahdi, and . "Investigation of fracture mode in orthotropic materials." 11th conference of Iranian aerospace society, Tehran, February 21-23, 2012 .
• Fakoor saghiye, Mahdi, and Nima Lasemi. "Calculation of crack tip parameters in orthotropic materials considering fiber inclination." 11th conference of Iranian aerospace society, Tehran, February 21-23, 2012 .
• Fakoor saghiye, Mahdi, , and sahar sadeghi kord kheili. "Satellite trajectory optimization with low-thrust using preliminary design method." 15th International Conference of Iranian Aerospace Society, Tehran, March 1-3, 2016 .
• Fakoor saghiye, Mahdi, Alireza Sattarzadeh, and . "Three-Axis Satellite Stabilization using Neuro-Fuzzy Controller." 15th International Conference of Iranian Aerospace Society, Tehran, March 1-3, 2016 .
• Fakoor saghiye, Mahdi, and Seyed Mohammad Navid Ghoreishi. "Calculation of stress intensity factors in rotating disks containing 3-D half elliptical cracks." 15th International Conference of Iranian Aerospace Society, Tehran, March 1-3, 2016 .
• Fakoor saghiye, Mahdi, and Seyed Mohammad Navid Ghoreishi. "Investigation of geometry and mechanical properties of composite coatings on Stress intensity factors of cracked rotating disks." 15th International Conference of Iranian Aerospace Society, Tehran, March 1-3, 2016 .
• Shokrieh, Mahmood Mehrdad, , and Mahdi Fakoor saghiye. "A New Method for Simulation of Mode I Delimitation in DCB Composite Specimens Considering R-Curves." ISME2014, Tehran, April 22-24, 2014 .
• Fakoor saghiye, Mahdi, , Amir Reza Kosari, and Parviz Mohammadzade. "Layout optimization of a GEO communication satellite." 12th Conference of Iranian Aerospace Society, Tehran, February 19-21, 2013 .
• Kosari, Amir Reza, , and Mahdi Fakoor saghiye. "Systematic design of a cube satellite using design structure matrix method." 12th Conference of Iranian Aerospace Society, Tehran, February 19-21, 2013 .
• , , Behzad Moshiri, Mahdi Fakoor saghiye, and Amir Reza Kosari. "Performance Comparison of classical and intelligent methods ." 11th Iranian Conference on Intelligent Systems, Tehran, February 27-28, 2013 .
• Heydari, Hamid Reza, Behzad Moshiri, Mahdi Fakoor saghiye, and Amir Reza Kosari. "Application of sensor data fusion theory for Increased accuracy of GEO satellite attitude control." 21 th Conference of Iranian Electrical Engineering, Mashhad, May 14-16, 2013 .
• Heydari, Hamid Reza, Mahdi Fakoor saghiye, Behzad Moshiri, and Amir Reza Kosari. "Performance comparison of data fusion methods for attitude estimation of a GEO satellite." ISME 2013, Tehran, May 7-9, 2013 .
• , , Mahdi Fakoor saghiye, and Hamed Porbaferani. "Design optimization of combustion chamber for liquid engine ." The 2th conferece of iranian aerospace proplution society, Tehran, November 20-21, 2013 .
• Fakoor saghiye, Mahdi, Marzieh Taghinezhad, Amir Reza Kosari, and Parviz Mohammadzade. "Layout optimization of a communication satellite components considering performance constraints." ISME2013, Tehran, May 7-9, 2013 .
• shoukrie, Mahmoud mehrdad, Mahdi Fakoor saghiye, and . "Design of sandwich panels as a support structure of solar cells for a GEO communication satellite ." 12th Conference of Iranian Aerospace Society, Tehran, February 19-21, 2013 .
• Fakoor saghiye, Mahdi, Amir Reza Kosari, and Hossein Saleh Ghafari. "Investigation of Kalman filter performance in data fusion of a GEO satellite ADCS sensors." First Conference on Satellites for Sustainable Development, Tehran, October 3-4, 2012 .
• , , Mahdi Fakoor saghiye, and Hamed Porbaferani. "Analytical investigation and design optimization of ." The 2th conferece of iranian aerospace proplution society, Tehran, November 20-21, 2013 .
• Fakoor saghiye, Mahdi, Alireza Sattarzadeh, and . "3- axis attitude stabilization of satellite In the case of disabled actuators in elliptical orbits." ISME2016, Yazd, April 26-28, 2016 .
• Manafi Farid, Hannaneh, and Mehdi Fakoorsaghieh. "Model of matrix reinforcement with fibers for orthotropic materials." 17th International Conference Iranian Aerospace Society, Tehran.
• Fakoorsaghieh, Mehdi , Seyed Mohammad Navid Ghoreishi, and Ahmad Azizi. "Progressive damage modeling of notched glass-epoxy composite plates under tensile static loading." ISME2018, Semnan.

International Conferences

• Fakoor saghiye, Mahdi, Amir Reza Kosari, and Hossein Saleh Ghafari. "Hybrid Estimation of Gyro Calibration Parameters and Moment of Inertia of a Geostationary Communication Satellite." APSCO Fourth International Symposium on Communication Sattelite Technology and Applications, Yogyakarta, November 5-8, 2012 .
• Kosari, Amir Reza, Mehdi Peyrovani, Mahdi Fakoor saghiye, and Hossein Nejat Pishkenari. "COMPARISON OF DIFFERENT CONFINGURATIONS OF THRUSTERS IN DESIGN OF LQG/LTR CONTROLLER FOR ATTITUDE CONTROL OF SATELLITE." APSCO 5th International Symposium on Satellite Remote Sensing, Ankara , November 8-10, 2013 .
• Fakoor saghiye, Mahdi, Amir Reza Kosari, Behzad Moshiri, and Hamid Reza Heydari. "Geostationary Satellite Attitude Determination Using Data Fusion of Three Attitude Sensors." APSCO Fourth International Symposium on Communication Sattelite Technology and Applications, Yogyakarta, November 5-8, 2012 .
• Fakoor saghiye, Mahdi, and Seyed Mohammad Navid Ghoreishi. "Stress intensity factor calculation of semi-elliptical cracks in composite pressure vessels." 1st International conference on composite pipes, vessels and tanks, Tehran, January 28-29, 2015 .
• Kosari, Amir Reza, Vahid Bohlouri, and Mahdi Fakoor saghiye. "DESIGN OF A CUBE SATELLITE WITH REMOTE SENSING APPLCATION." APSCO 5th International Symposium on Satellite Remote Sensing, Ankara , October 8-10, 2013 .
• Kosari, Amir Reza, Mehdi Peyrovani, Mahdi Fakoor saghiye, and Hossein Nejat Pishkenari. "Design of LQG/LTR Controller for Attitude Control of Satellite Using Thrusters and Reaction Wheels." APSCO 5th International Symposium on Satellite Remote Sensing, Ankara , November 8-10, 2013 .
• Kosari, Amir Reza, Hossein Saleh Ghafari, and Mahdi Fakoor saghiye. "Nonlinear PID design to control a geostationary spacecraft under actuator saturation." First International Conference on Robotics and Mechatronics, Tehran, February 13-14, 2013 .
• Kosari, Amir Reza, Marzieh Dolatabadi, Mahdi Fakoor saghiye, and Mohmmad ali Amiri Atashgah. "AERODYNAMIC OF SATELLITES IN LOW EARTH ORBITS." APSCO 5th International Symposium on Satellite Remote Sensing, Ankara , October 8-10, 2013 .
• Fakoor saghiye, Mahdi, and . "Crack growth simulation in composite materials using fictitious crack model." ISME 2012, Shiraz, May 15-17, 2012 .
• Taghinezhad, Marzieh, Mahdi Fakoor saghiye, and Amir Reza Kosari. "LAYOUT DESGN WITH HYBRID OPTIMAZATION METHOD IN REMOTE SENSING SATELLITE." APSCO 5th International Symposium on Satellite Remote Sensing, Ankara , October 8-10, 2013 .
• Kosari, Amir Reza, Vahid Bohlouri, and Mahdi Fakoor saghiye. "SYSTEMATTIC DESIGN OF A REMOTE SENSING CUBE SATELLITE USING DESING STRUCTURE MATRIX (DSM) METHOD." APSCO 5th International Symposium on Satellite Remote Sensing, Ankara , October 8-10, 2013 .
• shoukrie, Mahmoud mehrdad, Mahdi Fakoor saghiye, and . "Design and analysis of sandwich panels as a support structure of solar cells for a GEO communication satellite." APSCO Fourth International Symposium on Communication Sattelite Technology and Applications, Yogyakarta, November 5-8, 2012 .
• Kosari, Amir Reza, Vahid Bohlouri, and Mahdi Fakoor saghiye. "Expand of System Design of Cube Satellite with Design Structure Matrix Method." Symposium on Basic Space Technology, Small Satellite Missions for Developing Space Nations, Dubai, November 20-23, 2013 .
• Kosari, Amir Reza, Marzieh Dolatabadi, Mahdi Fakoor saghiye, and Mohmmad ali Amiri Atashgah. "PASSIVE AERODYNAMIC STABILIZATION OF REMOTE SENSING SATELLITE." APSCO 5th International Symposium on Satellite Remote Sensing, Ankara , October 8-10, 2013 .
• Kosari, Amir Reza, Mahdi Fakoor saghiye, Behzad Moshiri, and Samane Kaviri. "Design of optimal thrusters configuration for attitude control of geostationary communication satellite." APSCO Fourth International Symposium on Communication Sattelite Technology and Applications, Yogyakarta, November 5-8, 2012 .
• Fakoor saghiye, Mahdi, Amir Reza Kosari, and Marzieh Taghinezhad. "A new approach for a GEO satellite layout optimization." APSCO Fourth International Symposium on Communication Sattelite Technology and Applications, Yogyakarta, November 5-8, 2012 .
• Fakoor saghiye, Mahdi, and Seyed Mohammad Navid Ghoreishi. "Failure Criterion for Mixed Mode Fracture of Cracked Wood Specimens." 19th International Conference on Engineering Mechanics, paris, July 20-21, 2017 .
• Fakoor saghiye, Mahdi, and Seyed Mohammad Navid Ghoreishi. "Optimal Design of Composite Patch for a Cracked Pipe by Utilizing GA and FEM." 19th International Conference on Fracture Mechanics, Polymers, Composites and Adhesives, paris, May 18-19, 2017 .
• Mehrdad Shokrieh, Mahmood, Zahra Daneshjoo, and Mahdi Fakoor saghiye. "A Novel Analytical Solution of the Energy Absorption of Fiber Bridging Zone of Unidirectional Composites under Mixed Mode I/II Loading." The 5th International Conference on Composites: Characterization, Fabrication and Application, Tehran, December 20-21, 2016 .
• Fakoor saghiye, Mahdi, and Seyed Mohammad Navid Ghoreishi. "Calculation of stress intensity factors in rotating disks containing 3D semi elliptical cracks." 18th International Conference on Engineering Mechanics, Venice, August 8-9, 2016 .
• Fakoor saghiye, Mahdi, and Nabi Mehri Khansari. "Energy Based Criterion for Mixed Mode I/Ii Fracture of Composite Materials: Attending Damaged Zone." International Conference on Engineering & Technology, Computer, Basic and Applied Sciences, Shanghai, August 4-5, 2016 .
• Fakoorsaghieh, Mehdi , and Hannaneh Manafi Farid. "Extended Strain Energy Density Criterion for Fracture Investigation of Orthotropic Materials." ICEM 2018 : 20th International Conference on Engineering Mechanics, Amsterdam.
• Fakoorsaghieh, Mehdi , Nabi Mehri Khansari, and Ahmadreza Farokhi. "Investigation of Mode II Fracture Toughness in Orthotropic Materials." ICAEMS 2018 : 20th International Conference on Aeronautical Engineering and Mechanical Structure, Amsterdam.
• Mehdi Fakoorsaghieh, and Hannaneh Manafi Farid. "Extended Maximum Principal Stress Criterion for Fracture Assessment of Composite Materials." ICCSM 2020 : 22th International Conference on Composite Structures and Materials, Amsterdam.
• Nabi Mehri Khansari, Mozhgan Mokari, and Mehdi Fakoorsaghieh. "Image Based Micromechanical Method for Simulation of Damage Zone." The Biennial International Conference on Experimental Solid Mechanics (X-Mech 2020), Tehran.
• Zahra Daneshjoo, Mahmood Mehrdad Shokrieh, Mehdi Fakoorsaghieh, and Rene Alderliesten. "Mixed-mode I/II fracture criterion for crack growth behavior of orthotropic materials." The 7th International Conference on Composites: Characterization, Fabrication and Application (CCFA-7), Tabriz.